Imperial V-Coil Thread Repair Cutter Kit Helicoil Damaged Threads 1/4 – 1/2 UNF
Regular price
£220.04 GBP
Sale price
£220.04 GBP
Description
Professional imperial thread repair kit for commercial or occasional use
Stainless steel inserts
5 different sizes imperial inserts to choose from
V-Coil inserts provide high strength internal threads that resist the effects of both temperature and corrosion
V-Coil thread inserts are compatible with Helicoil kits as well
Imperial thread repair / Helicoil kit
Imperial UNF threads
Suitable for thread reinforcement or repair
Easy and simple to use
Imperial sizes ranging from 1/4 UNF – 1/2 UNF
5 different size helicoil in this one kit
SET INCLUDES THE FOLLOWING SIZE HELICOILS
• 1/4" UNF, 5/16” UNF, 3/8” UNF, 7/16” UNF and 1/2" UNF
Creates a strong internal thread in softer materials
Permanent repair to worn and damaged threads
Suitable for repairing damaged or stripped internal threads
Due to the narrow and exact tolerances the new thread is normally stronger
SIMPLE TO USE
1. DRILLING – Clear the damaged thread with a standard drill – the kit includes the correct size drill
2. CHECK – Check that the thread and pitch of the tap and the bolt match
3. TAPPING – Use the special V-coil taps for cutting the holding thread into the cleared hole. It is recommended to use a suitable cutting oil
4. INSTALL THE INSERT – place insert on installation tool and position the adjustable ring so that the insert tang is centred on the tang slot. Wind the insert in with a light downward pressure until half a turn below the surface
5. TANG REMOVAL – after finishing remove the installation tool and use the tang break tool to remove the tang
SET INCLUDES THE FOLLOWING
• 5 different sized taps – 1/4 x 28, 5/16 x 24, 3/8 x 24, 7/16 x 20 and 1/2 x 20
• 5 different sized drills – 6.7mm, • 8.3mm, 9.8mm, 11.5mm and 13mm
• 5 x insert installation tools
• 5 x tang removal tools – the part on the insert in the centre
• 25 x 1/4 UNF inserts
• 25 x 5/16 UNF inserts
• 25 x 3/8 UNF inserts
• 10 x 7/16 UNF inserts
• 10 x 1/2 UNF inserts
Comes in a metal tin for easy storage and transportation
Stainless steel inserts
5 different sizes imperial inserts to choose from
V-Coil inserts provide high strength internal threads that resist the effects of both temperature and corrosion
V-Coil thread inserts are compatible with Helicoil kits as well
Imperial thread repair / Helicoil kit
Imperial UNF threads
Suitable for thread reinforcement or repair
Easy and simple to use
Imperial sizes ranging from 1/4 UNF – 1/2 UNF
5 different size helicoil in this one kit
SET INCLUDES THE FOLLOWING SIZE HELICOILS
• 1/4" UNF, 5/16” UNF, 3/8” UNF, 7/16” UNF and 1/2" UNF
Creates a strong internal thread in softer materials
Permanent repair to worn and damaged threads
Suitable for repairing damaged or stripped internal threads
Due to the narrow and exact tolerances the new thread is normally stronger
SIMPLE TO USE
1. DRILLING – Clear the damaged thread with a standard drill – the kit includes the correct size drill
2. CHECK – Check that the thread and pitch of the tap and the bolt match
3. TAPPING – Use the special V-coil taps for cutting the holding thread into the cleared hole. It is recommended to use a suitable cutting oil
4. INSTALL THE INSERT – place insert on installation tool and position the adjustable ring so that the insert tang is centred on the tang slot. Wind the insert in with a light downward pressure until half a turn below the surface
5. TANG REMOVAL – after finishing remove the installation tool and use the tang break tool to remove the tang
SET INCLUDES THE FOLLOWING
• 5 different sized taps – 1/4 x 28, 5/16 x 24, 3/8 x 24, 7/16 x 20 and 1/2 x 20
• 5 different sized drills – 6.7mm, • 8.3mm, 9.8mm, 11.5mm and 13mm
• 5 x insert installation tools
• 5 x tang removal tools – the part on the insert in the centre
• 25 x 1/4 UNF inserts
• 25 x 5/16 UNF inserts
• 25 x 3/8 UNF inserts
• 10 x 7/16 UNF inserts
• 10 x 1/2 UNF inserts
Comes in a metal tin for easy storage and transportation
Imperial V-Coil Thread Repair Cutter Kit Helicoil Damaged Threads 1/4 – 1/2 UNF
